SSR V8-6.0L VIN H (2006)
10. Disconnect the I/P module yellow 4-way connector (1) located behind the I/P support.
11. Remove the CPA from the RF side impact module yellow 2-way connector (1) located under the passenger seat.
12. Disconnect the RF side impact module yellow 2-way connector (1) located under the passenger seat.
13. Remove the lock pillar trim panel.
14. Remove the CPA from the seat belt pretensioner - right connector.
15. Disconnect the seat belt pretensioner - right connector from the vehicle harness connector.
16. Remove the CPA from the LF side impact module yellow 2-way connector (1) located under the driver seat.