SSR V8-6.0L VIN H (2006)
1. Install the lower control arm bracket to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the lower control arm bracket mounting bolts to the frame.
^
Tighten the front lower control arm bracket mounting bolt to 265 Nm (195 ft. lbs.).
^
Tighten the rear lower control arm bracket mounting bolts to 240 Nm (177 ft. lbs.).
3. Install the lower control arm to the lower control arm bracket.
4. Install the lower control arm to lower control arm bracket mounting bolts.
Important: Ensure that the lower control arm is parallel to the lower control arm bracket during the installation and tightening of the lower control
arm mounting bolts and nuts. This will ensure correct alignment of the lower control arm bushings.
5. Install the lower control arm to lower control arm bracket mounting nuts.
Tighten the nuts to 130 Nm (96 ft. lbs.).
