SSR V8-6.0L VIN H (2006)
8. Remove the door window regulator motor bolts (1) from the door regulator.
Installation Procedure
Important: Do not allow the cable gear to come out of the housing. A failure will result with the cable coming off the spool.
1. Install the door window regulator motor to the cable housing by wiggling it into place.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the door window regulator motor bolts (1) to the door regulator.
Tighten the bolts to 5 N.m (44 lb in).
3. Install the door window regulator and motor in the vehicle.