Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
5.
Choose the outstanding core you wish to process, by selecting the Virtual Core Button on the far right side of the screen.
6.
Enter the information in the required fields and select the submit button. Record the confirmation number.
Canadian Dealers
1.
Return the removed Analog / Digital-Ready OnStar(R) VCIM to the Parts Manager.
2.
The Parts Manager will log onto https://adt.onstar.gm.mass.ca and enter information as prompted.
All Dealers
If the website indicates that the VCIM needs to be physically returned to the distributor, please use the pre-paid shipping label that was included in
the kit to return the removed VCIM.
Important:
To avoid a $250 core non-return charge, you must do one of the following within 30 days of kit shipment:
1.
Submit the necessary VCIM data through the website, as indicated above.
2.
Mail the removed core from the customer's vehicle back to the distributor.
3.
Return the unused digital upgrade kit back to the distributor using the pre-paid shipping label that is included in the kit box.
Returning the Upgraded Vehicle to the Customer
Returning the Upgraded Vehicle to the Customer
1.
Place the new OnStar Subscriber Information (Owner's Manual kit) in the customer's vehicle where they can review some of the new features of
the Digital-Capable system. The continuous digit dialing feature should be highlighted to the customer to avoid a return to the dealership for
dialing instructions. Advise the customer to discard any existing OnStar(R) Owner's Manuals that may be in the vehicle.
2.
Have the Service Advisor, Service Manager or Sales Consultant review the new OnStar(R) Hands-Free Calling procedure with the customer. The
customer is uses to their analog OnStar(R) Hands-Free Calling system, which uses individual digit dial to make a call. The Generation 6
Digital-Capable system uses continuous digit dial, and the customer needs to be made aware of this change.
3.
U.S. Dealers Only: Staple the "Tip Sheet - OnStar(R) Generation 6 Digitally-Capable System", that was included in the kit, to the customer's copy
of the repair order. This tip sheet will help your customer better understand their new OnStar(R) system.
4.
Canadian Dealers Only: Refer the customer to the Hands-Free Calling Quick Review Card from the new OnStar(R) Owner's Manual kit for help
with the new dialing procedure.
5.
Fill out the form entitled "GM Limited Warranty for Upgraded OnStar(R) Digital Equipment Program Participants" and staple a copy of this to the
customer's repair order. You may want to keep a copy for your records.
6.
Encourage your customer to press their blue OnStar(R) button the next day. The OnStar(R) Advisor will be able to review some of the new
features of their digital OnStar(R) system.
Closing the Onstar(R) Upgrade Exchange
Closing the OnStar(R) Upgrade Exchange
1.
Collect payment from the customer. Your dealership's open account (sales) will be charged for the cost of the chosen subscription plan, any
applicable subscription taxes, and the $15 upgrade charge after the vehicle has been configured through the TIS2WEB process.
2.
None of the costs associated with the OnStar Digital Upgrade program may be claimed as a GM goodwill event. These costs must be paid by the
customer, and may not be included in any goodwill offered to the customer. GM employees or representatives or field personnel are not able to
offer goodwill for this program. If the dealership decides to pay for the upgrade for their customer, be aware that your GM or OnStar(R) contact
will not be able to reimburse you for this cost.
3.
Use labor code Z2096 to submit your claim for the labor time published below plus 0.2 hr Administrative Allowance and an additional $20.00 Net
Amount.
^
For all dealer claim submissions (excluding U.S. Saturn), use Complaint Code MH - Technical Bulletin, and Failure Code 93 - Technical
Service Bulletin.
