Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
Front Bumper Bracket: Service and Repair
Front Bumper Bracket Replacement
Front Bumper Bracket Replacement
1500 Series
1. Remove related panels and components.
2. Remove damaged bumper bracket (Fig. 4-70).
IMPORTANT: Do not remove any material from end of frame rail.
3. Position the service template on the end of the frame rail; use 3M's Repositionable Adhesive or equivalent.
4. Drill three 13 mm (1/2 in) holes at locations indicated on template that is supplied with part.
IMPORTANT: Prior to refinishing, refer to the publication GM4901M-D-2000 "GM Approved Refinish Materials" for recommended products.
Do not combine paint systems. Refer to paint manufacturer's recommendations.
5. Apply approved anti-corrosion primer to bare metal surfaces.
6. Position replacement bumper bracket.
7. Install bolts, torque to 50 N.m (37 ft.lb.).
2500 Series
1. Remove related panels and components.
2. Remove damaged bumper bracket.
