Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
Front Bumper Bracket: Service and Repair
Front Bumper Impact Bar Bracket Replacement (Light Duty)
Front Bumper Impact Bar Bracket Replacement (Light Duty)
Removal Procedure
1. Remove all related panels and components.
IMPORTANT: Do not remove any material from the frame rail when removing the bumper bracket.
2. Remove the damaged bumper bracket.
Installation Procedure
IMPORTANT: Drill 2 holes on each side of the rail.
1. Position the template as shown. Drill two 15 mm (9/16 in) holes on each side of the frame rail at the locations indicated on the template.