Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
Front Door Interior Handle: Service and Repair
Door Handle Replacement
Door Handle Replacement - Inside
Removal Procedure
1. Remove the trim panel.
2. Remove the mounting bolts from the inside door handle.
3. Slide the inside door handle forward in order to release the unit from the door.
4. Disconnect the control rod from the inside door handle.
5. Remove the door handle assembly from the door.
Installation Procedure
1. Connect the control rod to the inside door handle.
2. Slide the handle into place.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the retaining bolts to the inside door handle.
