Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
Drink Holders: Removal and Replacement
Cupholder Replacement (Luxury)
Cupholder Replacement (Luxury)
Removal Procedure
1. Remove the upper trim bezel from the center console.
2. Remove the remote CD player if equipped.
3. Insert a flat bladed tool between the console and cupholder assembly.
4. Remove the cupholder assembly by prying the cupholder to release the clips (2).
5. Remove the wire connector for the cupholder.
6. Remove the cupholder from the console.
Installation Procedure
1. Place the cupholder assembly over the console.
2. Connect the wire connector to the cupholder assembly.
3. Push on the corners of the cupholder assembly till all the retaining clips (2) are seated.
4. Install the remote CD player if equipped.
5. Install the upper trim bezel.
Cupholder Replacement (Non-Luxury)
Cupholder Replacement (Non-Luxury)
Removal Procedure
1. Grab the middle of the cup holder firmly and pull outwards to release the clips (1).
2. Remove the cup holder from the console.
Installation Procedure
