Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
Installation Procedure
1. Install the door module into the switch panel bezel until it snaps into place.
2. Install the switch panel bezel and module to the door panel.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the screw that retains the switch panel bezel (1) to the front door panel.
Tighten the screw to 2 N.m (18 lb in).
4. Connect the electrical connectors.
5. Install the front door trim panel.
6. If equipped with camper mirrors program the door module. Refer to Service Programming System (SPS) in Programming. See: Testing and
Inspection/Programming and Relearning
Switch Replacement - Door Lock and Side Window - Passenger
