Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
1. Raise the head restraint (1) to the full up position.
2. Insert a paper clip or a similar tool in the hole at the side edges of the head restraint retainers.
3. Press in on the tool in order to release the retainer clips (2).
4. Lift the head restraint from the retainers.
Installation Procedure
1. Install the head restraint (1) into the retainers.
2. Push the head restraint to the full down position.
3. Pull up in order to ensure that the head restraint engages with the head restraint retainers (2).
Head Restraint Retainer Replacement - Front Seat
Head Restraint Retainer Replacement - Front Seat
Removal Procedure
1. Slide up the seat back trim cover in order to gain access to the rear cardboard panel fasteners. Refer to Seat Back Cover and Pad Replacement -
Front (W/O ULT) Seat Back Cover and Pad Replacement - Front (W/ULT).
2. Remove the panel fasteners. Pull back the panel in order to gain access to the bushings.
3. Remove the head restraint retainers from the seat back frame by squeezing the retaining tabs together at the base of the guide(s) and lifting up.
Installation Procedure
