Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
1. Install the filter (2) from the module.
2. Remove the seat cushion.
Module Replacement - Ventilation Heat and Cool - Seat Cushion
MODULE REPLACEMENT - VENTILATION HEAT AND COOL - SEAT CUSHION
REMOVAL PROCEDURE
1. Remove the console cup holder assembly.
2. Remove the wire connector (2) from the bracket.
3. Slide the module forward in car.
4. Disconnect the wire connectors (1).
5. Remove the module from the bracket.
INSTALLATION PROCEDURE
