Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
2. Remove the bolts from the hinge assembly, if equipped with folding seats.
3. Remove the seat cushion frame (5).
Installation Procedure
1. Install the seat cushion frame (5).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts to the hinge assembly, if removed.
Tighten to 7 N.m (61 lb in).
3. Install the seat cushion trim cover (8) and the pad (7).
Seat Cushion Trim Cover and Pad Replacement
Seat Cushion Trim Cover and Pad Replacement
Removal Procedure
1. Remove the front nuts (2) on the underside of the seat cushion.
2. Remove the front seat trim panel.
