Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
Front Door Weatherstrip: Service and Repair
Weatherstrip Replacement - Front Door (Upper)
Weatherstrip Replacement - Front Door (Upper)
Removal Procedure
1. Open the door.
2. Pull the roof drip molding from the pinchweld and the windshield molding flange.
Installation Procedure
1. Position the roof drip molding over the pinchweld.
2. Install the roof drip molding by pressing on the pinchweld flange until fully seated.
3. Close the door.
