chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

03-05-25-005 > < ABS - 'Service Stabilitrak(R)' Message/DTC C0455 Set|Page 6762
Page 1
background image

Electronic Brake Control Module: All Technical Service Bulletins
ABS/TCS - Service Stability Message/DTC C0550 Set

Bulletin No.: 04-08-49-006C

Date: January 05, 2005

TECHNICAL

Subject:
Service Stability Message Displayed, DTC C0550 Set (Reprogram EBCM)

Models:
2004-2005 Cadillac Escalade, Escalade ESV, Escalade EXT
2004-2005 Chevrolet Avalanche, Suburban, Tahoe
2004-2005 GMC Yukon, Yukon Denali, Yukon XL

Supercede:

This bulletin is being revised to correct the Subject line. Please discard Corporate Bulletin Number 04-08-49-006B (Section 08 - Body and Accessories).

Condition

Some customers may comment that while driving downhill and making a turn, the Service Stability message will display in the Driver Information Center
(DIC). This will occur prior to ABS activation and once stopped, the message will go off.

Upon investigation, the technician may find DTC C0550 stored in history.

Cause

The cause of this condition may be that the "Long Accel Gain" parameters in the EBCM are sensitive to certain driving conditions.

Correction

Technicians are to reprogram the EBCM with an updated software calibration. This new service calibration was released with TIS satellite data update
version 9.5 available September 20, 2004. As always, make sure your TECH 2(R) is updated with the latest software version.

Warranty Information

For vehicles repaired under warranty, use the table.

Disclaimer

03-05-25-005 > < ABS - 'Service Stabilitrak(R)' Message/DTC C0455 Set|Page 6762