Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
11. Remove the 2 brake caliper mounting bolts.
Caution: Do not depress the brake pedal with the brake rotors/calipers and/or the brake drums removed. Damage to the brake system may
result. If brake system damage occurs and is not repaired, vehicle damage and/or personal injury or death may result.
12. Remove the brake caliper from the brake caliper mounting bracket.
Installation Procedure
1. Install the brake caliper to the brake caliper mounting bracket.
2. Perform the following procedure before installing the caliper mounting bolts.
2.1.
Remove all traces of the original adhesive patch.
2.2.
Clean the threads of the bolt with brake parts cleaner or the equivalent and allow to dry.
2.3.
Apply Threadlocker GM P/N 12345493 (Canadian P/N 10953488) to the threads of the bolt.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the 2 brake caliper mounting bolts.
Tighten the bolts to 108 Nm (80 ft. lbs.).
