Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
3. Roll the carpet back to access cable grommet.
4. Raise and support the vehicle. Refer to Vehicle Lifting..
5. Disengage the grommet and the cable from the floor pan.
6. Disconnect the front cable from the intermediate cable.
7. Remove the cable from the body mount by depressing the retaining tabs.
8. Remove the cable.
Installation Procedure
1. Install the cable.
2. Snap the retainer tabs into the body mount.
3. Connect the front cable to the intermediate cable.
