Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
1. Install the surge tank inlet hose (1) to the surge tank.
2. Position the surge tank inlet hose clamp to the surge tank.
3. Install the surge tank inlet hose to the radiator.
4. Position the surge tank inlet hose clamp to the radiator.
5. Fill the cooling system. Refer to Draining and Filling Cooling System.
Outlet
Surge Tank Hose/Pipe Replacement - Outlet (4.8L, 5.3L, and 6.0L Engines)
Tools Required
-
J43181 Heater Line Quick Connect Release Tool
Removal Procedure
1. Drain the cooling system. Refer to Draining and Filling Cooling System.
