Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
3. Install the coolant air bleed pipe (2) and gaskets (3) onto the cylinder heads.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the coolant air bleed pipe studs (1).
Tighten the studs to 12 Nm (106 inch lbs.).
5. Install the coolant air bleed pipe covers (2) and bolts (1).
Tighten the bolts to 12 Nm (106 inch lbs.).
6. Install the intake manifold.
