Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
Important: Align the arrow at the throttle body end of the duct with the throttle body attaching stud.
5. Install the air cleaner outlet duct.
6. Install the radiator inlet hose clip to the outlet duct.
Notice: Refer to Fastener Notice in Service Precautions.
7. Tighten the air cleaner outlet duct clamps at the following locations:
-
Throttle body
-
MAF/IAT sensor
Tighten the air cleaner outlet duct clamp screws to 7 Nm (62 inch lbs.).
8. Fill the cooling system. Refer to Draining and Filling Cooling System.
