Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
3. Install the J41479 tapered cone (2) and bolts onto the rear of the crankshaft.
4. Tighten the bolts until snug. Do not overtighten.
5. Install the rear oil seal onto the tapered cone (2) and push the seal to the rear cover bore.
6. Thread the J4147g threaded rod into the tapered cone until the tool (1) contacts the oil seal
7. Align the oil seal into the tool (1).
8. Rotate the handle of the tool (1) clockwise until the seal enters the rear cover and bottoms into the cover bore.
9. Remove the J41479.
10. Install the engine flywheel. Refer to Engine Flywheel Replacement.
