Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
Valve Guide Seal: Service and Repair
Valve Stem Oil Seal and Valve Spring Replacement
Tools Required
-
J22794 Spark Plug Port Adapter
-
J38606 Valve Spring Compressor
Removal Procedure
1. Remove the rocker arm. Refer to Valve Rocker Arm and Push Rod Replacement.
2. Disconnect the spark plug wire at the spark plug.
-
Twist each plug wire boot 1/2 turn.
-
Pull only on the boot in order to remove the wire from the spark plug.
Important: Remove the spark plugs from the cylinder head with the engine at room temperature.
3. Loosen the spark plug 1 or 2 turns.
4. Brush or air blast away any dirt or debris from around the spark plug.
5. Remove the spark plug.
