Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
Control Assembly: Service and Repair
HVAC System - Manual
With Heat and A/C
HVAC CONTROL ASSEMBLY REPLACEMENT - FRONT AUXILIARY (FRONT OVERHEAD CONTROL HEAT AND A/C)
REMOVAL PROCEDURE
1. Remove the overhead console screw.
2. Remove the overhead console from the headliner.
3. Disconnect the electrical connectors from the auxiliary HVAC control module assembly.
4. Remove the overhead console from the vehicle.
5. Remove the auxiliary HVAC control assembly from the overhead console.
INSTALLATION PROCEDURE
1. Install the auxiliary HVAC control assembly to the overhead console.
2. Connect the electrical connectors to the auxiliary HVAC control module assembly.
3. Install the overhead console to the headliner.
4. Install the overhead console screw.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screw to 2 N.m (18 lb in).
With A/C Only
HVAC CONTROL ASSEMBLY REPLACEMENT - FRONT AUXILIARY (FRONT OVERHEAD CONTROL A/C ONLY)
REMOVAL PROCEDURE
