Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
13. Install the nuts (2) that secure the auxiliary HVAC module to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the nuts to 9 N.m (80 lb in).
14. Install the air conditioning lines (2,3) and the nut (4) to the auxiliary HVAC module.
Tighten the nut to 16 N.m (12 lb ft).
15. Install the heater lines (2,3) to the auxiliary HVAC module at the underside of vehicle.
16. Remove the safety stands.
17. Lower the vehicle.
18. Fill the engine coolant. Refer to Draining and Filling Cooling System in Cooling System.
19. Recharge the refrigerant to the system. Refer to Refrigerant Recovery and Recharging.
