Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
7. Release the spring latch from the PCM.
8. Release the PCM mounting tabs from the PCM.
9. Remove the PCM.
Installation Procedure
1. Install the PCM.Ensure that the mounting tabs are engaged.
2. Secure the spring latch to the PCM.
3. Connect the PCM electrical connectors.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Tighten the PCM electrical connector bolts (2).
Tighten the bolts to 8 N.m (71 lb in).
