Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
Outside Temperature Display Sensor: Service and Repair
AMBIENT AIR TEMPERATURE SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the radiator grille from the vehicle.
2. Remove the push pin retainer from the sensor mounted on the radiator support brace.
3. Disconnect the electrical connector from the sensor.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the sensor.
2. Install the sensor to the radiator support brace and install the push pin retainer.
3. Install the radiator grille to the vehicle.
