Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
6. If equipped with a 4.8L, 5.3L, or 6.0L engine, install the positive battery cable.
7. Install the positive cable to the clip on the oil pan.
8. Install the positive cable clip to the clip on the oil pan.
9. Install the positive cable to the starter.
10. Install the positive cable nut (1).
Tighten the nut to 9 N.m (80 lb in).
11. If equipped with a 4.8L, 5.3L, or 6.0L engine, install the battery cable bracket and bolt to the power steering pump.
Tighten the bolt to 25 N.m (18 lb ft).
12. Install the positive battery cable to the channel.
13. Slide the channel pin into the oil pan tab.
14. Install the positive battery cable channel bolt.
Tighten the bolt to 12 N.m (106 lb in).
15. Lower the vehicle.
