Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
6. Connect the reservoir assembly (1) to the pump housing assembly (2).
7. Install the O-ring seal.
Notice: Refer to Fastener Notice in Cautions and Notices.
8. Install the connector and fitting assembly (4) to the pump housing (1).
9. Install the pump mounting studs (2) to the pump housing (1).
^
Tighten the pump mounting studs to 58 Nm (44 ft. lbs.).
10. Tighten the connector and fitting assembly.
^
Tighten the connector and fitting assembly to 75 Nm (55 ft. lbs.).
