Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
5. Remove the outer tie rod end from the relay rod.
6. Inspect the shaft (6) for bent or damaged threads.
7. Clean the tapered surface of the steering knuckle (1).
Installation Procedure
1. Lubricate the tie rod threads with chassis lubricant.
2. Install the tie rod end (4) to the shaft (6).
3. Install the outer tie rod ball stud (3) to the steering knuckle (1).
4. Install the new prevailing torque nut (2) to the outer tie rod ball stud (3).
^
Tighten the nut to 50 Nm (37 ft. lbs.) for 15 series vehicles.
^
Tighten the nut to 65 Nm (48 ft. lbs.) for 25/35 series vehicles.
5. Adjust the front toe.
