chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Front Steering|Page 8907 > < Front Steering|Page 8905
Page 3
background image

Notice:  Refer to Rear Wheel Steering Lifting and Jacking Notice in Cautions and Notices.

1. Raise the vehicle. 
2. Remove the tire and wheel. 
3. Remove the tie rod bracket (2) retaining bolts (1) from the steering knuckle.

4. Loosen the tie rod jam nut (1).

5. Remove the nut retaining the outer tie rod end to the steering knuckle.
6. Using the J24319-B (1), remove the outer tie rod end from the steering knuckle.
7. Remove the outer tie rod end from the inner tie rod.

Installation Procedure

Front Steering|Page 8907 > < Front Steering|Page 8905