Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
Upper Side Moulding / Trim: All Technical Service Bulletins
Body - Dimple In Body Side Molding(s)
Bulletin No.: 04-08-111-002B
Date: October 26, 2006
TECHNICAL
Subject:
Dimple in Body Side Molding (Replace Moldings)
Models:
2004 Chevrolet Avalanche without Body Hardware (RPO WBH)
2004 Chevrolet Silverado, Suburban, Tahoe
with Body/Side Exterior-Molding-in-Color (RPO B85)
Supercede:
This bulletin is being revised to change the Warranty and add a revised parts information statement. Please discard Corporate Bulletin Number
04-08-111-002A (Section 08 - Body and Accessories).
Condition
Some customers may comment on a raised surface or a dimple in the exterior molded-in-color body side door moldings. This condition may be more
pronounced in warmer climates. This does not apply to standard colored keyed black body side moldings.
Cause
Engineering has determined that this condition may be caused by a bar code label on the backside of the molding that dimples the molding.
Correction
Replace ALL of the exterior body side door moldings. Refer to Molding Replacement-Body Side procedure in SI.
Dealer Action
Please contact all customers that were told they would be called when a repair became available.
Parts Information
