Suburban 1/2 Ton 2WD V8-5.3L VIN T (2004)
10. Record the number of exposed threads on the pinion stem for reference.
11. Install the J 8614-01 as shown.
12. Remove the pinion nut while holding the J 8614-01.
13. Remove the washer.
14. Install the J 8614-2 (2) and the J 8614-3 (3) into the J8614-01(1) as shown.
15. Remove the pinion yoke by turning the J 8614-3 (3) clockwise while holding the J8614-01 (1). Use a container in order to retrieve the lubricant.
16. Remove the pinion oil seal. Use a suitable seal removal tool. Do not damage the housing.
Installation Procedure
1. Install a new pinion oil seal using the J22388 or the J44414.
2. Apply sealant, GM P/N 12346004 (Canadian P/N 10953480) or equivalent, to the splines of the pinion yoke.
3. Install the pinion yoke.
Align the marks made during removal.