chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Handle Bezel Replacement - Inside|Page 15677 > < Handle Bezel Replacement - Inside|Page 15675
Page 4
background image

2. Release the upper extension by pulling outward on the front edge in order to release the upper retainer clips.
3. Remove the upper extension from the trim panel by lifting up and out.

INSTALLATION PROCEDURE

1. Position the lower retainer to the trim panel.
2. Align the upper retainer clips to the door frame.
3. Press inward on the upper extension until the clips fully engage securing the panel to the door.

Water Deflector Replacement

Water Deflector Replacement

Removal Procedure

1. Remove the rear door trim panel.

2. Using a flat-bladed tool, break the bond between the sealer and the door.
3. Pull off the water deflector from the inner door panel.

Installation Procedure

Handle Bezel Replacement - Inside|Page 15677 > < Handle Bezel Replacement - Inside|Page 15675