Suburban 1/2 Ton 2WD V8-5.3L VIN Z Flex Fuel (2006)
Glove Compartment: Procedures
Door Replacement - Instrument Panel (I/P) Compartment
DOOR REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT
REMOVAL PROCEDURE
1. Close the I/P compartment door.
2. Drill out the 2 rivets (2).
3. Remove I/P storage compartment door retaining screws (1) from the instrument panel.
4. Remove the I/P compartment door.
INSTALLATION PROCEDURE
1. Install the I/P compartment door.
2. Install the I/P compartment retaining screws (1) to the instrument panel.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 1.9 N.m (17 lb in).
Instrument Panel (I/P) Assist Handle Replacement
INSTRUMENT PANEL (I/P) ASSIST HANDLE REPLACEMENT
REMOVAL PROCEDURE
1. Remove both the passenger side air deflector louvers.
2. From the air deflector louver opening, press the release tabs on the instrument panel assist handle retainers on both sides.
3. Pull the assist handle from the instrument panel.
INSTALLATION PROCEDURE
