Suburban 1/2 Ton 2WD V8-5.3L VIN Z Flex Fuel (2006)
2. Remove hinge pillar panel.
INSTALLATION PROCEDURE
1. Install the hinge pillar panel.
2. Install the door sill plate.
Trim Panel Replacement - Rear Quarter - Left
TRIM PANEL REPLACEMENT - REAR QUARTER - LEFT
REMOVAL PROCEDURE
1. Remove the rear seat.
2. Remove the garnish molding.
3. Remove the trim panel.
4. Remove the door sill plate.
5. Remove the quarter panel trim screws.
6. Remove the quarter panel trim from the vehicle.
INSTALLATION PROCEDURE
1. Install the quarter panel trim to the vehicle.
2. Install the quarter panel trim screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 2 N.m (18 lb in).
3. Install the door sill plate.
4. Install the trim panel.
5. Install the garnish molding.
6. Install the rear seat.
Trim Panel Replacement - Rear Quarter - Left (Utility)
