Suburban 1/2 Ton 2WD V8-5.3L VIN Z Flex Fuel (2006)
Seat Cushion Frame Replacement - Rear (60/40 Split - 50/50 Split)
SEAT CUSHION FRAME REPLACEMENT - REAR (60/40 SPLIT - 50/50 SPLIT)
REMOVAL PROCEDURE
1. Remove the seat cushion trim cover (8) and the pad (7).
2. Remove the bolts from the hinge assembly, if equipped with folding seats.
3. Remove the seat cushion frame (5).
INSTALLATION PROCEDURE
1. Install the seat cushion frame (5).
2. Install the bolts to the hinge assembly, if removed.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten to 7 N.m (61 lb in).
3. Install the seat cushion trim cover (8) and the pad (7).
Seat Cushion Trim Cover and Pad Replacement
SEAT CUSHION TRIM COVER AND PAD REPLACEMENT