Suburban 1/2 Ton 2WD V8-5.3L VIN Z Flex Fuel (2006)
Cooling System Air Bleeder Pipe / Hose: Service and Repair
Coolant Air Bleed Hose Replacement
Coolant Air Bleed Hose Replacement (4.8L, 5.3L, and 6.0L Engines)
Removal Procedure
1. If necessary, remove the engine sight shield.
2. Position the coolant air bleed hose clamp at the throttle body.
3. Remove the coolant air bleed hose from the throttle body.
4. Position the hose clamp at the pipe.
5. Remove the coolant air bleed hose (1) from the pipe (2).
Installation Procedure
