chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Thermostat, Engine Cooling > < Coolant Temperature Sensor/Switch (For Computer)|Locations|Page 4151
Page 2
background image

2. Install the ECT sensor.

Tighten the sensor to 20 N.m (15 lb ft).

3. Connect the ECT sensor electrical connector (5).
4. Refill the cooling. Refer to Draining and Filling Cooling System in Cooling System.

Thermostat, Engine Cooling > < Coolant Temperature Sensor/Switch (For Computer)|Locations|Page 4151