Suburban 1/2 Ton 2WD V8-5.3L VIN Z Flex Fuel (2006)
Heat Shield: Service and Repair
Floor Panel Heat Shield Replacement
Floor Panel Heat Shield Replacement
Removal Procedure
1. Remove the exhaust manifold pipe, if necessary.
2. Remove the catalytic converter, if necessary.
3. Remove the exhaust front heat shield nuts.
4. Remove the exhaust front heat shield from the studs.
5. Remove the exhaust heat shield nuts.
6. Remove the exhaust heat shield from the studs.
Installation Procedure
1. Install the exhaust heat shield to the studs.
