Suburban 1/2 Ton 2WD V8-5.3L VIN Z Flex Fuel (2006)
Blower Motor: Service and Repair
Heating, Ventilation and Air Conditioning
Blower Motor Replacement (Delphi)
BLOWER MOTOR REPLACEMENT (DELPHI)
REMOVAL PROCEDURE
1. If equipped, remove the sound insulator panel.
2. Remove the blower motor insulating cover screws.
3. Disconnect the electrical connector from the blower motor.
4. Remove the blower motor insulating cover.
5. Pull the retaining tab down while turning the blower motor counter clockwise in order to disengage the blower motor from the heater/ventilation
module.
6. Remove the blower motor.
INSTALLATION PROCEDURE
