Suburban 1/2 Ton 2WD V8-5.3L VIN Z Flex Fuel (2006)
3. Install the discharge hose to the condenser using new sealing washers.
4. Install the discharge hose nut to the condenser.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the nut to 16 N.m (12 lb ft).
5. Install the upper air baffle.
6. Install the discharge hose (1) to the A/C compressor using new sealing washers.
7. Install the discharge hose mounting bolt.
Tighten the bolt to 16 N.m (12 lb ft).
8. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
9. Leak test the fittings of the component using the J 39400-A.