chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Campaign - ECM Updates for Virtual Flex Fuel Sensor|Page 7425 > < Campaign - ECM Updates for Virtual Flex Fuel Sensor|Page 7423

Suburban 1/2 Ton 2WD V8-5.3L VIN Z Flex Fuel (2006)

Page 2
background image

7. Remove the fuel composition sensor bracket nuts.
8. Remove the fuel composition sensor.
9. If required, remove the fuel composition sensor bolts and remove the sensor from the bracket.

INSTALLATION PROCEDURE

1. If required, install the fuel composition sensor to the bracket and install the bolts.

NOTE:  Refer to Fastener Notice in Service Precautions.

Tighten bolts to 10 N.m (89 lb in).

2. Install the fuel composition sensor.
3. Install the fuel composition sensor bracket nuts.

Tighten nuts to 17 N.m (13 lb ft).

Campaign - ECM Updates for Virtual Flex Fuel Sensor|Page 7425 > < Campaign - ECM Updates for Virtual Flex Fuel Sensor|Page 7423