Suburban 1/2 Ton 2WD V8-5.3L VIN Z Flex Fuel (2006)
Steering Damper: Service and Repair
Steering Damper Replacement
^
Tools Required
-
J 24319-B Universal Steering Linkage Puller
-
J 29193 Steering Linkage Installer-12 mm
Removal Procedure
1. Raise the vehicle. Support the vehicle with safety stands. Refer to Lifting and Jacking the Vehicle.
2. Remove the engine protection shield, if equipped.
3. Important: Do not reuse the nut.
Remove the steering damper (2) ball stud nut (1).
4. Remove the steering damper ball stud from the relay rod using the J 24319-B .
5. Important: Do not reuse the nut.
Remove the steering damper mounting bolt (5) and the nut (6).
6. Remove the steering damper (4) from the vehicle.
7. Inspect the following parts:
^
The steering damper for leaks and damage
