Suburban 1/2 Ton 4WD V8-5.3L VIN Z Flex Fuel (2006)
7. Install the 2 retaining screws.
Tighten the screws to 1.6 N.m (14 lb in).
8. Install the rear cupholder to the end panel.
9. Install the storage bin.
Console Replacement (W/Console Mounting Bracket)
Console Replacement (W/Console Mounting Bracket)
Removal Procedure
1. Remove both front seats.
2. If equipped with a Bose(R) amplifier, remove the radio amp fuse located under the hood electrical center.
3. Remove the upper console bezel.
4. Remove the cupholder.
5. Remove the screws (1) retaining the console to the I/P.
6. Disconnect the wire connectors.
7. Remove the console assembly from the vehicle.
8. Remove the rear seat audio control from the console, if equipped.
Installation Procedure
1. Install the rear seat audio control to the console, if equipped.
2. Install the console in the vehicle.
