Suburban 1/2 Ton 4WD V8-5.3L VIN Z Flex Fuel (2006)
5. Remove the quarter panel trim screws.
6. Remove the quarter panel trim from the vehicle.
Installation Procedure
1. Install the quarter panel trim to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the quarter panel trim screws.
Tighten the screws to 2 N.m (18 lb in).
3. Install the door sill plate.
4. Install the trim panel.
5. Install the garnish molding.
6. Install the rear seat.
Garnish Molding Replacement - Center Pillar
Garnish Molding Replacement - Center Pillar
Removal Procedure
1. Remove the door sill plates.
2. Remove the pillar moldings by holding the moldings firmly while pulling out.
Installation Procedure