Suburban 1/2 Ton 4WD V8-5.3L VIN Z Flex Fuel (2006)
Brake Pedal Assy: Service and Repair
Non - Adjustable Pedal
Brake Pedal Assembly Replacement
Removal Procedure
1. Remove the pushrod retaining clip (4).
2. Remove the stop lamp switch (2) and the pushrod (3) from the brake pedal stud (1)
3. Remove the nut from the brake pedal bolt
4. Remove the brake pedal bolt.
5. Remove the brake pedal.
Installation Procedure
1. Install the brake pedal.
