Suburban 1/2 Ton 4WD V8-5.3L VIN Z Flex Fuel (2006)
5. Remove the splash shield (6) (25 Series).
Installation Procedure
1. install the splash shield (6) (25 Series).
2. Install the splash shield (6) (15 Series).
3. Install the hub and bearing assembly. Refer to Wheel Hub, Bearing, and Seal Replacement (RWD) or Wheel Hub, Bearing, and Seal Replacement
(4WD) in Front Suspension.
4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
5. Remove the safety stands.
6. Lower the vehicle.
(W/O NYS)
