Suburban 1/2 Ton 4WD V8-5.3L VIN Z Flex Fuel (2006)
16. Compare the brake rotor assembled LRO to the following specification:
^
Front brake rotor maximum allowable assembled lateral runout: 0.13 mm (0.005 inch)
^
Rear brake rotor maximum allowable assembled lateral runout: 0.13 mm (0.005 inch)
17. If the brake rotor assembled LRO measurement exceeds the specification, bring the LRO to within specifications. Refer to Brake Rotor Assembled
Lateral Runout (LRO) Correction. See: Testing and Inspection/Component Tests and General Diagnostics/Brake Rotor Assembled Lateral Runout
(LRO) Measurement
18. If the brake rotor assembled LRO measurement is within specification, install the brake caliper and depress the brake pedal several times to secure
the rotor in place before removing the J45101-100 and the lug nuts.