Suburban 1/2 Ton 4WD V8-5.3L VIN Z Flex Fuel (2006)
5. Disconnect the intermediate cable from the front cable.
6. Remove the intermediate cable.
Installation Procedure
1. Install the intermediate cable.
2. Connect the intermediate cable to the front cable.
3. Connect the equalizer to the rear park brake cables.
Notice: Refer to Fastener Notice in Service Precautions.
4. If vehicle is a 1500 series with the second design or a 2500 series, install the nut to the threaded end of the intermediate cable.
^
Tighten the nut to 3.5 N.m (31 lb in).
