Suburban 1/2 Ton 4WD V8-5.3L VIN Z Flex Fuel (2006)
2. Install the park brake lever.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the park brake lever mounting nuts
Tighten the nuts to 25 Nm (18 ft. lbs.).
4. Connect the park brake release cable to the park brake lever.
5. Connect the park brake warning lamp connector.
6. Install the left side hinge pillar panel. Refer to Trim Panel Replacement - Hinge Pillar in Interior Trim.
7. Install the left side kick panel.
8. Install the MID-Bussed Electrical Center to the bracket.
9. Install the park brake cable to the equalizer bar by pulling down on the cable in front of the equalizer and installing the cable to the equalizer bar.
