Suburban 1/2 Ton 4WD V8-5.3L VIN Z Flex Fuel (2006)
Important: Insert the three lower tabs into the radiator support flange. Keeping the shroud parallel to the radiator will ensure the correct
installation of the lower tabs.
2. Install the cooling fan shroud bolts.
^
Tighten the bolts to 9 Nm (80 inch lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
3. If equipped, install the cooler lines to the clip and close the clip.
4. Connect the electrical connectors to the cooling fans.
5. Install the clip attaching the wiring harness to the shroud.
6. Install the surge tank inlet hose to the radiator.
